Model Number: FS-8-07
Brand Name: FANGSEN
Key Specifications/Special Features:
Chain link fence machine is used to make all kinds of chain link fence which is widely used on sports ground, garden, airport, highwaySuitable wire to machine:High-quality low-carbon steel wire, galvanized steel wire, stainless steel wire, aluminum alloy wire, aluminum-clad steel wirePacking details: wooden pallet and plastic packing in the container
Electric system:a. Japan Mitsubishi PLC origin
b. Inverter: Japan
c. Low-voltage electrical from Germany Schneider
d. Electric and machinery from Taiwan Teco electric
Corollary equipment:A. 1set: winding machine for receive the mesh
B. 2 wire paying out frame, can take 500kg/coil wire
C. 2 set moldsfrom 20-100mm for different mesh size
Advantages of chain link fence machine:1. It adopts technique of single model and double helixand it can improve the work efficiency greatly
2. Japan Mitsubishi PLC (programmable logic controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise)
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge
6. There is controller cabinethanging and it can set length of wire mesh, once weaving finish, it will stop
7. An alarm devicehas been installed, once production is completed, alarm will ring
8. There is a limit switch and it can stop immediately
Technical parameters of chain link fence machine:
Product name |
chain klink fence machine |
System control |
PLC system control |
Wire diameter (mm) |
1.8-4.0mm feeding wirenumbers two |
Mesh size (mm) |
25x25-100x100 |
Nettingwidth (mm) |
1000-4000 |
Capacity (m2/hour) |
100-120 (m2/hour) |
Rated voltage |
380V-3P-50Hz, can be made as your requirement |
Motor power |
11kW |
Weight(T) |
4.2 |
Outside size |
6600*1430*1600mm,5100*1500*1250mm |
Accessories |
operationtools1set operationmanual1piece
|
Guarantee period |
one year |